In the shop
new valve gaskets had to be installed and the valve covers repainted. Note how clean the engine looks inside!
the radiator was leaking badly - so it was recored
A H4 european headlight had to be installed as the original T3 lights are not street legal in Austria
some of the parts
the left front disc brake is sticking - a picture before the rebuild
the left front disc brake is sticking - a picture before the rebuild
new stabilizer links in place together with new ball joints
to replace the evaporator the whole AC had to be disassembled
to replace the evaporator the whole AC had to be disassembled
to replace the evaporator the whole AC had to be disassembled
when I got the car - I started to clean and degrease the engine bay
my wife helped me to change the radio
trying to repair the radio
trying to repair the radio
wet cleaning the carpet
wet cleaning the carpet
Cleaning the original floor mats
My buddy Tayfun helped me cleaning the car - here he is polishing the hood
My buddy Tayfun helped me cleaning the car - here he is polishing the hood
the Eldo at a shop for examination
the ALC blew the regulator valve - I found another one and replaced it
the old original positive battery cable which I replaced with new correct ones
the fusible link of the headlights crumbled into pieces when I touched it
the harness going to the starter - I removed it and put in new battery cables and a new fusible link
some of the parts I had to buy
the AC was torn out by the previous owner in an attempt to replace the evaporator - it will be restored back to original condition
the engine bay - as it looked like when I got the car
The floor mats turned out like new
the master vacuum switch was the main reason for the blower problem
the vacuum hoses around the hot water valve were leaking a little
the idle speed up relay on the carb needed to be replaced
the vacuum hoses around the hot water valve were leaking a little
I hooked up another switch for testing purposes - this solved the problem
One of the door jamb switches had a problem
rebuilding the seat transmission - most of the time dried grease is the only problem. Just disassemble it, clean it - relube and reassemble!
rebuilding the seat transmission - most of the time dried grease is the only problem. Just disassemble it, clean it - relube and reassemble!
rebuilding the seat transmission - most of the time dried grease is the only problem. Just disassemble it, clean it - relube and reassemble!
rebuilding the seat transmission - most of the time dried grease is the only problem. Just disassemble it, clean it - relube and reassemble!
had to replace the thermostat - my friend Richard helped as a bolt broke
had to replace the thermostat - my friend Richard helped as a bolt broke
a Camaro RS headlight actuator modified to fit into the 67 Eldorado
had to replace the carburetor gasket as the shop installed it incorrectly
original and replacement actuator from a 68 Camaro RS
original and replacement actuator from a 68 Camaro RS
Installing new speakers
Installing the RediRad system to the radio - so I can listen to external audio through my original AM Radio
Installing new speakers
Eldorado headlight doors vacuum diagram
Eldorado headlight doors vacuum diagram
another way to modify the Camaro headlight actuator to fit into the Cadillac
another way to modify the Camaro headlight actuator to fit into the Cadillac
another way to modify the Camaro headlight actuator to fit into the Cadillac
another way to modify the Camaro headlight actuator to fit into the Cadillac
another way to modify the Camaro headlight actuator to fit into the Cadillac
another way to modify the Camaro headlight actuator to fit into the Cadillac
67headlights-BG-IMG_4775.jpg
67headlights-BG-IMG_4777.jpg